Big Bore Cylinder Kit Without Head Ø 47,6 mm, 70 cc
Sensitive increase in performance without compromising engine reliability
Maximum durability and smoothness guaranteed by a special nickel and silicon treatment of the barrel
Cylinder made of a special light aluminum alloy
Race Use Only Product - Please check details on the "Race use only" footer's section
WARNING: the cylinder head and base gaskets contained in the kit are specifically developed for Athena cylinders kits. Whenever the cylinder kit is disassembled, replace the gaskets with the specific Athena spare gasket kit: DO NOT use OE replacement gaskets.
Description
Athena has been constantly investing in cylinder aftermarket replacement parts for more than ten years, to improve their production and performance. All the cylinders are entirely engineered in Italy by Athena’s R&D Department which has a strong internal know-how and cutting-edge tools to design and test each piece. They are coated with motor-nicksil, a nickel-silicon coating developed by Athena to obtain smoothness and optimal wear resistance.
Athena’s cylinder kits and its components are recognized worldwide for their performance, durability and reliability.
Athena’s Big Bore Cylinder Kits guarantees an increase in performance that can be observed along the power curve, keeping the reliability at the same level of the original components.
The kit includes the high-quality aluminum cylinder with increased bore, the complete piston with the piston pin and rings, and all the necessary gaskets.
All the components of the kit have been developed to withstand the highest temperatures, pressures and stresses and have been validated by Athena technicians with severe bench and road tests.
This cylinder kit can be installed without making any changes to the engine crankcase.
CAUTION! All Athena products must be used in compliance with the specific national regulations of the member state where it is being marketed or sold. Athena declines all responsibility for any improper use.
Technical features
Bore Diameter (mm) | 47.60 |
Displacement (cc) | 70.00 |
Net Weight (Kg) | 0.96 |
Vehicle compatibility
PEUGEOT BUXY 50 cc 1994/1997 |
PEUGEOT ELYSEO 50 cc 1999 |
PEUGEOT LOOXOR 50 cc 2001/2003 |
PEUGEOT METAL-X 50 cc 2002 |
PEUGEOT SPEEDAKE 50 cc 1995/1997 |
PEUGEOT SPEEDFIGHT 50 cc 1997/1998 |
PEUGEOT SPEEDFIGHT KAT 50 cc 1999 |
PEUGEOT SQUAB 50 cc 1995/1997 |
PEUGEOT SV GEO 50 cc 1991/1995 |
PEUGEOT TREKKER ROAD 50 cc 1998/2000 |
PEUGEOT VIVACITY 50 cc 1999 |
PEUGEOT VIVACITY KAT 50 cc 1999/2002 |
PEUGEOT VIVACITY SERIE SPECIALI 50 cc 2002 |
PEUGEOT VIVACITY VSX-XR 50 cc 2002/2004 |
PEUGEOT X-FIGHT 50 cc 2000 |
PEUGEOT ZENITH LN / LS / N 50 cc 1994/1998 |
SACHS GIPSY 50 cc |
SACHS HERCULES LIMBO 50 cc |
SACHS SPEEDFIGHT 50 cc |
SACHS SQUAB 50 cc |
SACHS SR 50 cc |
- Net Weight (Kg): 0.00
- Net Weight (Kg): 0.40
- Bore Diameter (mm): 47.55
- Big End Pin Diameter (mm): 12x7,5x37
- Number Of Segments: 1
- Piston Type: Cast
- Bore Diameter (mm): 47.54
- Big End Pin Diameter (mm): 12x7,5x37
- Number Of Segments: 1
- Piston Type: Cast
- Net Weight (Kg): 0.01
- Bore Diameter (mm): 47.56
- Big End Pin Diameter (mm): 12x7,5x37
- Number Of Segments: 1
- Piston Type: Cast
- Net Weight (Kg): 0.01
- Bore Diameter (mm): 47.60
- Displacement (cc): 70.00
- Net Weight (Kg): 0.88
- Bore Diameter (mm): 47.60
- Displacement (cc): 70.00
- Net Weight (Kg): 0.94
- Bore Diameter (mm): 47.60
- Displacement (cc): 73.00
- Net Weight (Kg): 0.94
- Bore Diameter (mm): 47.00
- Displacement (cc): 70.00
- Net Weight (Kg): 1.21
- Bore Diameter (mm): 47.00
- Displacement (cc): 70.00
- Net Weight (Kg): 0.79
- Bore Diameter (mm): 47.60
- Displacement (cc): 70.00
- Net Weight (Kg): 1.57
- Bore Diameter (mm): 47.60
- Displacement (cc): 70.00
- Net Weight (Kg): 1.55
- Bore Diameter (mm): 47.60
- Displacement (cc): 70.00
- Net Weight (Kg): 1.25
- Net Weight (Kg): 0.06
- Oil Seal Height (mm): 11.00
- Oil Seal External Diameter (mm): 54.00
- Oil Seal Internal Diameter (mm): 41.00
- Net Weight (Kg): 0.40
- Net Weight (Kg): 0.06
- Oil Seal Height (mm): 10.50
- Oil Seal External Diameter (mm): 53.00
- Oil Seal Internal Diameter (mm): 41.00
- Net Weight (Kg): 0.05
- Oil Seal Height (mm): 10.50
- Oil Seal External Diameter (mm): 52.00
- Oil Seal Internal Diameter (mm): 40.00
- Net Weight (Kg): 0.05
- Oil Seal Height (mm): 11.00
- Oil Seal External Diameter (mm): 54.00
- Oil Seal Internal Diameter (mm): 43.00
- Net Weight (Kg): 0.05
- Oil Seal Height (mm): 11.00
- Oil Seal External Diameter (mm): 48.00
- Oil Seal Internal Diameter (mm): 35.00
- Net Weight (Kg): 0.29