Big Bore Cylinder Kit With Head Ø 47,6 mm, 70 cc
Sensitive increase in performance without compromising engine reliability
Maximum durability and smoothness guaranteed by a special nickel and silicon treatment of the barrel
Cylinder made of a special light aluminum alloy
Race Use Only Product - Please check details on the "Race use only" footer's section
WARNING: the cylinder head and base gaskets contained in the kit are specifically developed for Athena cylinders kits. Whenever the cylinder kit is disassembled, replace the gaskets with the specific Athena spare gasket kit: DO NOT use OE replacement gaskets.
Description
Athena has been constantly investing in cylinder aftermarket replacement parts for more than ten years, to improve their production and performance. All the cylinders are entirely engineered in Italy by Athena’s R&D Department which has a strong internal know-how and cutting-edge tools to design and test each piece. They are coated with motor-nicksil, a nickel-silicon coating developed by Athena to obtain smoothness and optimal wear resistance.
Athena’s cylinder kits and its components are recognized worldwide for their performance, durability and reliability.
Athena’s Big Bore Cylinder Kits guarantees an increase in performance that can be observed along the power curve, keeping the reliability at the same level of the original components.
The kit includes the high-quality aluminum cylinder with increased bore, the cylinder head, the complete piston with the piston pin and rings, and all the necessary gaskets.
All the components of the kit have been developed to withstand the highest temperatures, pressures and stresses and have been validated by Athena technicians with severe bench and road tests.
This cylinder kit can be installed without making any changes to the engine crankcase.
CAUTION! All Athena products must be used in compliance with the specific national regulations of the member state where it is being marketed or sold. Athena declines all responsibility for any improper use.
Technical features
Bore Diameter (mm) | 47.60 |
Displacement (cc) | 70.00 |
Net Weight (Kg) | 1.55 |
Vehicle compatibility
BS'V DIO GP 50 cc |
BS'V DIO SP 50 cc |
BS'V DIO SR 50 cc |
BS VILLA DIO ZX 50 cc |
HONDA DIO GP / SR / SP 50 cc |
HONDA DIO ZX (VERTICAL CYL 50 cc |
HONDA SC01 50 cc |
HONDA SC01L 50 cc |
HONDA SRX SHADOW 50 cc |
HONDA SXR 50 cc |
HSC SC01 50 cc |
HSC SC01L 50 cc |
KYMCO CX 50 cc 1993 |
KYMCO CX SUPER 50 cc 1994/1997 |
KYMCO DJ W 50 cc 1994/2000 |
KYMCO DJ X 50 cc 1991/1992 |
KYMCO DJ Y 50 cc 1993 |
KYMCO FEVER ZX 50 cc 1999/2000 |
KYMCO FEVER ZX EURO2 50 cc 2003/2004 |
KYMCO K12 50 cc 1995/2000 |
KYMCO KB 50 cc 1995/2000 |
SYM DD 50 cc 2002/2007 |
- Net Weight (Kg): 0.00
- Net Weight (Kg): 0.40
- Bore Diameter (mm): 47.55
- Big End Pin Diameter (mm): 12x7,5x37
- Number Of Segments: 1
- Piston Type: Cast
- Bore Diameter (mm): 47.54
- Big End Pin Diameter (mm): 12x7,5x37
- Number Of Segments: 1
- Piston Type: Cast
- Net Weight (Kg): 0.01
- Bore Diameter (mm): 47.56
- Big End Pin Diameter (mm): 12x7,5x37
- Number Of Segments: 1
- Piston Type: Cast
- Net Weight (Kg): 0.01
- Net Weight (Kg): 0.55
- Bore Diameter (mm): 47.60
- Displacement (cc): 70.00
- Net Weight (Kg): 1.57
- Bore Diameter (mm): 47.60
- Displacement (cc): 70.00
- Net Weight (Kg): 1.25
- Bore Diameter (mm): 47.60
- Displacement (cc): 73.00
- Net Weight (Kg): 1.54
- Bore Diameter (mm): 47.60
- Displacement (cc): 70.00
- Net Weight (Kg): 0.94
- Bore Diameter (mm): 47.60
- Displacement (cc): 70.00
- Net Weight (Kg): 0.96
- Bore Diameter (mm): 47.60
- Displacement (cc): 70.00
- Net Weight (Kg): 0.88
- Bore Diameter (mm): 47.60
- Displacement (cc): 73.00
- Net Weight (Kg): 0.94
- Bore Diameter (mm): 47.00
- Displacement (cc): 70.00
- Net Weight (Kg): 1.21
- Net Weight (Kg): 0.06
- Oil Seal Height (mm): 11.00
- Oil Seal External Diameter (mm): 54.00
- Oil Seal Internal Diameter (mm): 41.00
- Net Weight (Kg): 0.40
- Net Weight (Kg): 0.06
- Oil Seal Height (mm): 10.50
- Oil Seal External Diameter (mm): 53.00
- Oil Seal Internal Diameter (mm): 41.00
- Net Weight (Kg): 0.05
- Oil Seal Height (mm): 10.50
- Oil Seal External Diameter (mm): 52.00
- Oil Seal Internal Diameter (mm): 40.00
- Net Weight (Kg): 0.05
- Oil Seal Height (mm): 11.00
- Oil Seal External Diameter (mm): 54.00
- Oil Seal Internal Diameter (mm): 43.00
- Net Weight (Kg): 0.05
- Oil Seal Height (mm): 11.00
- Oil Seal External Diameter (mm): 48.00
- Oil Seal Internal Diameter (mm): 35.00
- Net Weight (Kg): 0.29