Big Bore Cylinder Kit Ø 43 mm, 63 cc, Cast Iron
Unmatched price-quality ratio
Maximum durability and smoothness guaranteed
Gaskets developed with the most advanced technologies to ensure maximum tightness even at high temperatures and pressures
Race Use Only Product - Please check details on the "Race use only" footer's section
Description
Athena has been constantly investing in cylinder aftermarket replacement parts for more than ten years, to improve their production and performance. All the cylinders are entirely engineered in Italy by Athena’s R&D Department which has a strong internal know-how and cutting-edge tools to design and test each piece.
Athena’s cylinder kits and its components are recognized worldwide for their performance, durability and reliability.
Athena’s Big Bore Cylinder Kits guarantees an increase in performance that can be observed along the power curve, keeping the reliability at the same level of the original components.
The kit includes the high-quality cast iron cylinder with increased bore, the complete piston with the piston pin and rings, and all the necessary gaskets.
All the components of the kit have been developed to withstand the highest temperatures, pressures and stresses and have been validated by Athena technicians with severe bench and road tests.
This cylinder kit can be installed without making any changes to the engine crankcase.
CAUTION! All Athena products must be used in compliance with the specific national regulations of the member state where it is being marketed or sold. Athena declines all responsibility for any improper use.
Technical features
| Bore Diameter (mm) | 43.00 |
| Displacement (cc) | 63.00 |
| Net Weight (Kg) | 1.63 |
Vehicle compatibility
| GILERA CBA SS 50 cc |
| KINETIC DOUBLE PLUS 50 cc |
| KINETIC TFR PLUS 50 cc |
| PIAGGIO BOXER BRAVO 50 cc |
| PIAGGIO BRAVO 50 cc |
| PIAGGIO CBA 50 cc |
| PIAGGIO CIAO PX / FL / TEEN / FREE 50 cc |
| PIAGGIO ECO 50 cc |
| PIAGGIO GRILLO 50 cc |
| PIAGGIO SI FL2 / MIX 50 cc |
- Bore Diameter (mm): 47.00
- Displacement (cc): 75.00
- Net Weight (Kg): 2.28
- Bore Diameter (mm): 57.00
- Displacement (cc): 130.00
- Net Weight (Kg): 4.32
- Bore Diameter (mm): 55.00
- Displacement (cc): 102.00
- Net Weight (Kg): 2.20
- Bore Diameter (mm): 47.00
- Displacement (cc): 65.00
- Net Weight (Kg): 4.67
- Bore Diameter (mm): 43.00
- Displacement (cc): 63.00
- Net Weight (Kg): 0.89
- Bore Diameter (mm): 43.00
- Displacement (cc): 63.00
- Net Weight (Kg): 0.89
- Bore Diameter (mm): 70.50
- Displacement (cc): 223.00
- Net Weight (Kg): 4.82
- Bore Diameter (mm): 50.00
- Displacement (cc): 77.00
- Compression Ratio: 14.0:1
- Net Weight (Kg): 1.55
- Net Weight (Kg): 0.06
- Oil Seal Height (mm): 11.00
- Oil Seal External Diameter (mm): 54.00
- Oil Seal Internal Diameter (mm): 41.00
- Net Weight (Kg): 0.40
- Net Weight (Kg): 0.06
- Oil Seal Height (mm): 10.50
- Oil Seal External Diameter (mm): 53.00
- Oil Seal Internal Diameter (mm): 41.00
- Net Weight (Kg): 0.05
- Oil Seal Height (mm): 10.50
- Oil Seal External Diameter (mm): 52.00
- Oil Seal Internal Diameter (mm): 40.00
- Net Weight (Kg): 0.05
- Oil Seal Height (mm): 11.00
- Oil Seal External Diameter (mm): 54.00
- Oil Seal Internal Diameter (mm): 43.00
- Net Weight (Kg): 0.05
- Oil Seal Height (mm): 11.00
- Oil Seal External Diameter (mm): 48.00
- Oil Seal Internal Diameter (mm): 35.00
- Net Weight (Kg): 0.29
United States