4T Forged Racing Piston Ø 74,96 mm for Athena Cylinder
Higher performances compared to the original
Lightened and reinforced piston structure
Maximum balance between the performance and components' life
For CAST IRON OE cylinder, recommended fitting clearance 0,050÷0,064mm / For ALUMINUM-NICKEL ATHENA cylinder, recommended fitting clearance 0,030÷0,050mm
Description
Athena, leader in producing motorcycle spare parts for over 40 years, offers a wide range of 2-stroke and 4-stroke forged pistons made by reverse extrusion. Produced with cutting-edge CNC machining tools, which ensure dimensional tolerances of less than 0.01 mm, Athena pistons are made of a special high-performance aluminum alloy with high silicon content that guarantee the same reliability of the OE piston, while at the same time providing greater resistance and excellent performance. The perfectly smooth profile ensures a regular flow and the perfect flame propagation.
Some pistons’ skirts are moreover treated with a molybdenum disulfide coating applied by screen printing which further reduce friction to enhance performance and durability.
Athena engineers ensure advanced technical solutions and the highest quality standards equal to or better than those adopted in OE production, so as to guarantee performance and reliability.
Each piston, engineered in Italy by Athena R&D department, is tested on engine dynamometer benches under progressive stress load, and thereafter on track to validate its performance even in the most extreme conditions.
The proven quality of Athena pistons is offered at an extremely affordable price.
This piston for Athena and OE cylinders is equipped with piston rings that guarantee less friction with the cylinder and therefore a higher performance.
Athena takes care of the development of the pistons down to the smallest detail: the rings are produced in Japan with wear-resistant coatings (PVD or chromium nitride) to increase the retain and the durability. The rings perfectly adapt to the cylinder liner even at low tangential load.
This piston kit contains the piston, the pin, the circlips, and the piston rings. All components are replaceable and interchangeable in case of need.
All Athena products produced in greater displacement and power than those provided by the road code of the user's country, are intended exclusively for competitive use. Athena declines all responsibility for any use of the product contrary to national regulations.
Guarantee of compliance should not be applicable to products destined for competitive sports use or which are used in high-performance or high-speed applications unless it is a clear case of faultiness.
Technical features
| Bore Diameter (mm) | 74.96 |
| Net Weight (Kg) | 0.28 |
Vehicle compatibility
| PIAGGIO BEVERLY IE ABS E4 (EMEA) 300 cc 2016/2019 |
| PIAGGIO BEVERLY RST 4T 4V IE EURO3 300 cc 2010/2016 |
| PIAGGIO BEVERLY TOURER IE 300 cc 2009/2010 |
| PIAGGIO CARNABY CRUISER 300 cc 2009/2012 |
| PIAGGIO MP3 IE LT/MIC/TOURING 300 cc 2010/2014 |
| PIAGGIO MP3 LT BUSINESS/SPORT/ENJOY 300 cc 2014/2018 |
| PIAGGIO VESPA GTS/GTV 300 cc 2008/2018 |
| PIAGGIO X7 EVO IE EURO3 300 cc 2009/2010 |
Downloads
Downloads
| Download |
- Bore Diameter (mm): 74.97
- Net Weight (Kg): 0.31
- Bore Diameter (mm): 77.94
- Displacement (cc): 250.00
- Big End Pin Diameter (mm): 17x10x46
- Number Of Segments: 2
- Bore Diameter (mm): 84.00
- Displacement (cc): 650.00
- Big End Pin Diameter (mm): 20x13x60
- Number Of Segments: 3
- Bore Diameter (mm): 74.96
- Compression Height (mm): 25.30
- Displacement (cc): 250.00
- Big End Pin Diameter (mm): 20x12x46
- Bore Diameter (mm): 74.96
- Piston Type: Forged
- Bore Diameter (mm): 74.97
- Compression Height (mm): 25.30
- Displacement (cc): 250.00
- Big End Pin Diameter (mm): 20x12x46
- Bore Diameter (mm): 78.96
- Displacement (cc): 249.00
- Number Of Segments: 2
- Piston Type: Forged
- Net Weight (Kg): 0.06
- Oil Seal Height (mm): 11.00
- Oil Seal External Diameter (mm): 54.00
- Oil Seal Internal Diameter (mm): 41.00
- Net Weight (Kg): 0.40
- Net Weight (Kg): 0.06
- Oil Seal Height (mm): 10.50
- Oil Seal External Diameter (mm): 53.00
- Oil Seal Internal Diameter (mm): 41.00
- Net Weight (Kg): 0.05
- Oil Seal Height (mm): 10.50
- Oil Seal External Diameter (mm): 52.00
- Oil Seal Internal Diameter (mm): 40.00
- Net Weight (Kg): 0.05
- Oil Seal Height (mm): 11.00
- Oil Seal External Diameter (mm): 54.00
- Oil Seal Internal Diameter (mm): 43.00
- Net Weight (Kg): 0.05
- Oil Seal Height (mm): 11.00
- Oil Seal External Diameter (mm): 48.00
- Oil Seal Internal Diameter (mm): 35.00
- Net Weight (Kg): 0.29
United States