Big Bore Cylinder Kit With Head Ø 47,6 mm, 70 cc, Pin Ø 12 mm, Domed Head Piston
Sensitive increase in performance without compromising engine reliability
Maximum durability and smoothness guaranteed by a special nickel and silicon treatment of the barrel
Gaskets developed with the most advanced technologies to ensure maximum tightness even at high temperatures and pressures
Race Use Only Product - Please check details on the "Race use only" footer's section
WARNING: the cylinder head and base gaskets contained in the kit are specifically developed for Athena cylinders kits. Whenever the cylinder kit is disassembled, replace the gaskets with the specific Athena spare gasket kit: DO NOT use OE replacement gaskets.
Description
Athena has been constantly investing in cylinder aftermarket replacement parts for more than ten years, to improve their production and performance. All the cylinders are entirely engineered in Italy by Athena’s R&D Department which has a strong internal know-how and cutting-edge tools to design and test each piece. They are coated with motor-nicksil, a nickel-silicon coating developed by Athena to obtain smoothness and optimal wear resistance.
Athena’s cylinder kits and its components are recognized worldwide for their performance, durability and reliability.
Athena’s Big Bore Cylinder Kits guarantees an increase in performance that can be observed along the power curve, keeping the reliability at the same level of the original components.
The kit includes the high-quality aluminum cylinder with increased bore, the cylinder head, the piston with domed head with the piston pin and rings, and all the necessary gaskets.
All the components of the kit have been developed to withstand the highest temperatures, pressures and stresses and have been validated by Athena technicians with severe bench and road tests.
This cylinder kit can be installed without making any changes to the engine crankcase.
CAUTION! All Athena products must be used in compliance with the specific national regulations of the member state where it is being marketed or sold. Athena declines all responsibility for any improper use.
Technical features
Bore Diameter (mm) | 47.60 |
Displacement (cc) | 70.00 |
Net Weight (Kg) | 1.29 |
Vehicle compatibility
APRILIA SR INIEZIONE E CARBURATORE 50 cc 2014 |
APRILIA SR R FACTORY 50 cc 2010/2014 |
APRILIA SR STREET 50 cc 2003/2012 |
DERBI GP1 LC 50 cc 2001/2003 |
GILERA DNA GP EXPERIENCE 50 cc 2003/2004 |
GILERA DNA LC 50 cc 2000/2007 |
GILERA RUNNER FL 50 cc 2002 |
GILERA RUNNER LC 50 cc 1997/2000 |
GILERA RUNNER POGGIALI 50 cc 2002 |
GILERA RUNNER SP LC 50 cc 2002/2006 |
GILERA RUNNER SP RACE 50 cc 2006 |
GILERA RUNNER SP SC 50 cc 2006/2007 |
GILERA RUNNER SP / ST 50 cc 2008/2012 |
PIAGGIO NRG EXTREME LC 50 cc 1999/2000 |
PIAGGIO NRG LC 50 cc 1994/1996 |
PIAGGIO NRG MC3 DD LC 50 cc 2001 |
PIAGGIO NRG MC3 LC 50 cc 2001/2004 |
PIAGGIO NRG POWER DD 50 cc 2005/2015 |
PIAGGIO NRG RST MC2 LC 50 cc 1996/1998 |
PIAGGIO NTT LC 50 cc 1995/1996 |
PIAGGIO QUARTZ 50 cc 1992/1996 |
PIAGGIO ZIP H2O / SP 50 cc 1996/2004 |
PIAGGIO ZIP SP EU2 50 cc 2006/2012 |
Downloads
Downloads
Mounting instructions Cylinder kit Scooter Piaggio 70 Cc_ITA_ENG_DEU_ESP | Download |
- Net Weight (Kg): 0.05
- Bore Diameter (mm): 47.54
- Compression Height (mm): 24.50
- Big End Pin Diameter (mm): 12x8x37
- Number Of Segments: 1
- Bore Diameter (mm): 47.55
- Compression Height (mm): 24.50
- Big End Pin Diameter (mm): 12x8x37
- Number Of Segments: 1
- Net Weight (Kg): 0.01
- Net Weight (Kg): 0.00
- Bore Diameter (mm): 47.56
- Compression Height (mm): 24.50
- Big End Pin Diameter (mm): 12x8x37
- Number Of Segments: 1
- Net Weight (Kg): 0.01
- Net Weight (Kg): 0.01
- Net Weight (Kg): 0.39
- Bore Diameter (mm): 47.60
- Displacement (cc): 70.00
- Net Weight (Kg): 1.24
- Bore Diameter (mm): 47.60
- Displacement (cc): 70.00
- Net Weight (Kg): 1.20
- Bore Diameter (mm): 47.60
- Displacement (cc): 70.00
- Net Weight (Kg): 1.31
- Bore Diameter (mm): 47.60
- Displacement (cc): 70.00
- Net Weight (Kg): 1.35
- Bore Diameter (mm): 47.60
- Displacement (cc): 70.00
- Net Weight (Kg): 1.19
- Bore Diameter (mm): 47.60
- Displacement (cc): 70.00
- Net Weight (Kg): 1.39
- Bore Diameter (mm): 47.60
- Displacement (cc): 70.00
- Net Weight (Kg): 1.25
- Bore Diameter (mm): 47.60
- Displacement (cc): 70.00
- Net Weight (Kg): 1.20
- Net Weight (Kg): 0.06
- Oil Seal Height (mm): 11.00
- Oil Seal External Diameter (mm): 54.00
- Oil Seal Internal Diameter (mm): 41.00
- Net Weight (Kg): 0.40
- Net Weight (Kg): 0.06
- Oil Seal Height (mm): 10.50
- Oil Seal External Diameter (mm): 53.00
- Oil Seal Internal Diameter (mm): 41.00
- Net Weight (Kg): 0.05
- Oil Seal Height (mm): 10.50
- Oil Seal External Diameter (mm): 52.00
- Oil Seal Internal Diameter (mm): 40.00
- Net Weight (Kg): 0.05
- Oil Seal Height (mm): 11.00
- Oil Seal External Diameter (mm): 54.00
- Oil Seal Internal Diameter (mm): 43.00
- Net Weight (Kg): 0.05
- Oil Seal Height (mm): 11.00
- Oil Seal External Diameter (mm): 48.00
- Oil Seal Internal Diameter (mm): 35.00
- Net Weight (Kg): 0.29