Big Bore Cylinder Kit With Head Ø 47,6 mm, 70 cc, Pin Ø 12 mm, Domed Head Piston
Sensitive increase in performance without compromising engine reliability
Maximum durability and smoothness guaranteed by a special nickel and silicon treatment of the barrel
Cylinder made of a special light aluminum alloy
Race Use Only Product - Please check details on the "Race use only" footer's section
WARNING: the cylinder head and base gaskets contained in the kit are specifically developed for Athena cylinders kits. Whenever the cylinder kit is disassembled, replace the gaskets with the specific Athena spare gasket kit: DO NOT use OE replacement gaskets.
Description
Athena has been constantly investing in cylinder aftermarket replacement parts for more than ten years, to improve their production and performance. All the cylinders are entirely engineered in Italy by Athena’s R&D Department which has a strong internal know-how and cutting-edge tools to design and test each piece. They are coated with motor-nicksil, a nickel-silicon coating developed by Athena to obtain smoothness and optimal wear resistance.
Athena’s cylinder kits and its components are recognized worldwide for their performance, durability and reliability.
Athena’s Big Bore Cylinder Kits guarantees an increase in performance that can be observed along the power curve, keeping the reliability at the same level of the original components.
The kit includes the high-quality aluminum cylinder with increased bore, the cylinder head, the complete piston with the piston pin and rings, and all the necessary gaskets.
All the components of the kit have been developed to withstand the highest temperatures, pressures and stresses and have been validated by Athena technicians with severe bench and road tests.
This cylinder kit can be installed without making any changes to the engine crankcase.
CAUTION! All Athena products must be used in compliance with the specific national regulations of the member state where it is being marketed or sold. Athena declines all responsibility for any improper use.
Technical features
Bore Diameter (mm) | 47.60 |
Displacement (cc) | 70.00 |
Net Weight (Kg) | 1.31 |
Vehicle compatibility
APRILIA SCARABEO 2T 50 cc 2010/2014 |
APRILIA SPORT CITY ONE 2T 50 cc 2008/2010 |
DERBI ATLANTIS 02 BULLET 50 cc 2003/2005 |
DERBI ATLANTIS 02 CITY 50 cc 2003/2006 |
DERBI ATLANTIS 02 TWO CHIC 50 cc 2005 |
DERBI ATLANTIS EU2 2T 50 cc 2007/2009 |
DERBI ATLANTIS O2 50 cc 2002 |
DERBI BOULEVARD EU2 2T 50 cc 2009/2012 |
DERBI VARIANT SPORT 2T 50 cc 2012 |
GILERA EASY MOVING 50 cc 1995/1996 |
GILERA ICE 50 cc 2001/2005 |
GILERA STALKER 50 cc 1997/2011 |
GILERA STALKER NAKED 50 cc 2008 |
GILERA STORM 50 cc 1994/1995 |
GILERA TYPHOON 50 cc 1994/1997 |
GILERA TYPHOON XR 50 cc 2000 |
GILERA TYPHOON X / X KAT 50 cc 1998/1999 |
ITALJET JET SET 50 cc 2001/2003 |
ITALJET TORPEDO NEW (2T 50 cc 2001/2003 |
PIAGGIO DIESIS 50 cc 2001 |
PIAGGIO FLY 2T 50 cc 2005/2011 |
PIAGGIO FREE 50 cc 1992/1994 |
PIAGGIO FREE DELIVERY 50 cc 2000/2001 |
PIAGGIO FREE FL 50 cc 1995/2002 |
PIAGGIO LIBERTY 50 cc 1997/2005 |
PIAGGIO LIBERTY MOC 2T 50 cc 2009/2011 |
PIAGGIO LIBERTY PTT EU2 2T 50 cc 2004/2005 |
PIAGGIO LIBERTY RST 2T 50 cc 2004 |
PIAGGIO NRG EXTREME 50 cc 1999/2000 |
PIAGGIO NRG MC3 AIR 50 cc 2001/2004 |
PIAGGIO SFERA BASE 50 cc 1991/1993 |
PIAGGIO SFERA MAQUILLAGE 2 50 cc 1994 |
PIAGGIO SFERA RST 50 cc 1995/1997 |
PIAGGIO TYPHOON 2T E2 50 cc 2010/2012 |
PIAGGIO TYPHOON 5 KAT ARIA 50 cc 2001/2004 |
PIAGGIO VESPA ET2 - CARBURATORE 50 cc 1997/2005 |
PIAGGIO VESPA LX 2T 50 cc 2005/2011 |
PIAGGIO VESPA PRIMAVERA 2T 50 cc 2013/2016 |
PIAGGIO VESPA S 2T 50 cc 2007/2011 |
PIAGGIO VESPA SPRINT 2T 50 cc 2013/2016 |
PIAGGIO ZIP BASE 50 cc 1992/1996 |
PIAGGIO ZIP BIMODALE 50 cc 1994/1997 |
PIAGGIO ZIP DISCO 50 cc |
PIAGGIO ZIP EURO1 50 cc 2000/2004 |
PIAGGIO ZIP FAST RAIDER 50 cc 1993/1994 |
PIAGGIO ZIP FAST RAIDER RST 50 cc 1996/1997 |
PIAGGIO ZIP RST AIR 50 cc 1996/1999 |
Downloads
Downloads
Mounting instructions Cylinder kit Scooter Piaggio 70 Cc_ITA_ENG_DEU_ESP | Download |
- Net Weight (Kg): 0.05
- Bore Diameter (mm): 47.54
- Compression Height (mm): 24.50
- Big End Pin Diameter (mm): 12x8x37
- Number Of Segments: 1
- Bore Diameter (mm): 47.55
- Compression Height (mm): 24.50
- Big End Pin Diameter (mm): 12x8x37
- Number Of Segments: 1
- Bore Diameter (mm): 47.56
- Compression Height (mm): 24.50
- Big End Pin Diameter (mm): 12x8x37
- Number Of Segments: 1
- Net Weight (Kg): 0.00
- Net Weight (Kg): 0.01
- Net Weight (Kg): 0.01
- Net Weight (Kg): 0.01
- Net Weight (Kg): 0.39
- Bore Diameter (mm): 47.60
- Displacement (cc): 70.00
- Net Weight (Kg): 1.24
- Bore Diameter (mm): 47.60
- Displacement (cc): 70.00
- Net Weight (Kg): 1.29
- Bore Diameter (mm): 47.60
- Displacement (cc): 70.00
- Net Weight (Kg): 1.19
- Bore Diameter (mm): 47.60
- Displacement (cc): 70.00
- Net Weight (Kg): 1.20
- Bore Diameter (mm): 47.60
- Displacement (cc): 70.00
- Net Weight (Kg): 1.35
- Bore Diameter (mm): 47.60
- Displacement (cc): 70.00
- Net Weight (Kg): 1.39
- Bore Diameter (mm): 47.60
- Displacement (cc): 70.00
- Net Weight (Kg): 1.20
- Bore Diameter (mm): 47.60
- Displacement (cc): 70.00
- Net Weight (Kg): 1.25
- Net Weight (Kg): 0.06
- Oil Seal Height (mm): 11.00
- Oil Seal External Diameter (mm): 54.00
- Oil Seal Internal Diameter (mm): 41.00
- Net Weight (Kg): 0.40
- Net Weight (Kg): 0.06
- Oil Seal Height (mm): 10.50
- Oil Seal External Diameter (mm): 53.00
- Oil Seal Internal Diameter (mm): 41.00
- Net Weight (Kg): 0.05
- Oil Seal Height (mm): 10.50
- Oil Seal External Diameter (mm): 52.00
- Oil Seal Internal Diameter (mm): 40.00
- Net Weight (Kg): 0.05
- Oil Seal Height (mm): 11.00
- Oil Seal External Diameter (mm): 54.00
- Oil Seal Internal Diameter (mm): 43.00
- Net Weight (Kg): 0.29
- Net Weight (Kg): 0.05
- Oil Seal Height (mm): 11.00
- Oil Seal External Diameter (mm): 48.00
- Oil Seal Internal Diameter (mm): 35.00