Standard Bore Cylinder Kit Ø 38 mm, 50 cc, Intake Ø 9,0 mm
Same reliability and performance of the original components
Maximum durability and smoothness guaranteed by a special nickel and silicon treatment
Gaskets developed with the most advanced technologies to ensure maximum tightness even at high temperatures and pressures
Description
Athena has been constantly investing in cylinder aftermarket replacement parts for more than ten years, to improve their production and performance.
All the cylinders are entirely engineered in Italy by Athena’s R&D Department which has a strong internal know-how and cutting-edge tools to design and test each piece. They are coated with motor-nicksil, a nickel-silicon coating developed by Athena to obtain smoothness and optimal wear resistance.
Athena’s cylinder kits and its components are recognized worldwide for their performance, durability and reliability.
The Standard Bore cylinder kit developed by Athena guarantees the same performance as the original spare parts, extreme reliability and optimal smoothness as a result of the lightweight aluminum cylinder, the barrel with nickel-silicon coating, and a piston designed to reduce further friction.
The kit includes the high-quality aluminum cylinder with standard bore, the complete piston with the piston pin and rings, and all the necessary gaskets.
All the components of the kit have been developed to withstand the highest temperatures, pressures and stresses and have been validated by Athena technicians with severe bench and road tests.
This cylinder kit can be installed without making any changes to the engine crankcase.
CAUTION! All Athena products must be used in compliance with the specific national regulations of the member state where it is being marketed or sold. Athena declines all responsibility for any improper use.
Technical features
| Bore Diameter (mm) | 38.00 |
| Displacement (cc) | 50.00 |
| Net Weight (Kg) | 1.28 |
Vehicle compatibility
| MOTOESA PUCH 50 cc |
| PIAGGIO PUCH 1 50 cc |
| PUCH 2T MAXI 48 cc |
- Net Weight (Kg): 0.01
- Bore Diameter (mm): 38.00
- Big End Pin Diameter (mm): 12x7,5x31
- Number Of Segments: 2
- Piston Type: Cast
- Bore Diameter (mm): 38.00
- Displacement (cc): 50.00
- Net Weight (Kg): 1.28
- Bore Diameter (mm): 38.00
- Displacement (cc): 50.00
- Net Weight (Kg): 1.28
- Bore Diameter (mm): 40.00
- Displacement (cc): 50.00
- Compression Ratio: 17.0:1
- Net Weight (Kg): 1.92
- Bore Diameter (mm): 40.00
- Displacement (cc): 50.00
- Compression Ratio: 15.3:1
- Net Weight (Kg): 1.84
- Bore Diameter (mm): 39.00
- Displacement (cc): 50.00
- Net Weight (Kg): 2.82
- Bore Diameter (mm): 39.00
- Displacement (cc): 50.00
- Net Weight (Kg): 2.68
- Bore Diameter (mm): 38.40
- Displacement (cc): 50.00
- Net Weight (Kg): 2.89
- Bore Diameter (mm): 38.00
- Displacement (cc): 47.00
- Net Weight (Kg): 1.93
- Net Weight (Kg): 0.06
- Oil Seal Height (mm): 11.00
- Oil Seal External Diameter (mm): 54.00
- Oil Seal Internal Diameter (mm): 41.00
- Net Weight (Kg): 0.40
- Net Weight (Kg): 0.06
- Oil Seal Height (mm): 10.50
- Oil Seal External Diameter (mm): 53.00
- Oil Seal Internal Diameter (mm): 41.00
- Net Weight (Kg): 0.05
- Oil Seal Height (mm): 10.50
- Oil Seal External Diameter (mm): 52.00
- Oil Seal Internal Diameter (mm): 40.00
- Net Weight (Kg): 0.05
- Oil Seal Height (mm): 11.00
- Oil Seal External Diameter (mm): 54.00
- Oil Seal Internal Diameter (mm): 43.00
- Net Weight (Kg): 0.29
- Net Weight (Kg): 0.05
- Oil Seal Height (mm): 11.00
- Oil Seal External Diameter (mm): 48.00
- Oil Seal Internal Diameter (mm): 35.00
Ireland