RX1 PRO Control Unit with WiFi-COM, Map Switch and Second Injector Kit
Race Use Only Product – Not intended for street use – Please check details on the “Race use only” footer’s section
The image shown here is for illustrative purposes only and might not fully display the features of the product
Description
PRO FACTORY KIT is the racing kit composed by RX1 PRO ECU and 2nd injector, developed by GET R&D Department to optimize the flow of fuel at mid and top, guaranteeing better performance. The kit is designed for 250cc 4-stroke engines starting from 2018 onwards and takes the most out of the engine without compromising the reliability.
RX1 PRO in the kit is ready with two maps:
- Map 1: for a standard engine with OEM single injector
- Map 2: for a standard engine with GET second injector.
These maps are totally reprogrammable through both WiGET App, by using the included WiFiCOM device, and/ or MAYA software (sold separately).
The mounting instructions included in the kit allows a quick and intuitive installation, without any further engine modifications needed.
Bullet points
Maximum power and reliability
Easy and intuitive to mount
Integrated Traction Control (GPA technology) and compatible with electronic Launch Control (LC-GPA device)
Technical features
| Compatible Also With Tuned Engines | Yes |
| Compatible With Get Second Injector | Yes |
| Compatible With Gpa Switch | Yes |
| Compatible With Lc Gpa | Yes |
| Compatible With SX1 Connect | Not set |
| Compatible With SX1 Controller | Not set |
| Compatible With Wificom | Yes |
| Data Logging Compatibility | Yes |
| Gpa Switch Included | No |
| Kit Second Injector Included | Yes |
| LC GPA Included | No |
| Maps Available | 2 |
| Map Setting Modality | Via WiFiCOM Via MAYA |
| SX1 Connect Included | Not set |
| SX1 Controller Included | Not set |
| Wificom Included | Yes |
Downloads
| Instruction Manual RX1 PRO | Download | |
| RX1 PRO specific manual for YAMAHA YZ 250 F 19-23 | YZ 450 F 20-22 | Download | |
| Application maps (PRO FACTORY KIT Yamaha YZ250F 2019 - 2020) | zip | Download |
| Mounting instructions GET 2nd INJECTOR KIT for Yamaha YZF 250 2019-2020_ITA_ENG_FRA_ESP_DEU_PORT | Download |
- Replaceable Battery: Si
- display: LCD
- Ip Standard Level: IP67
- Programmable Through App: Yes
- batteryCapacity: 2,5 Ah
- CCA (A): 175.00
- Dimensions (cm): 107x85x56
- Energy (Wh): 32.00
- Suitable For: RX1, ECULMB AND OTHER , NOT FOR SX1 SERIES
- Product Typology: Programming kit
- Suitable For: ALL G.E.T. ECUs
- Net Weight (Kg): 0.50
- Replaceable Battery: No
- display: LCD
- Battery Life: 6 years
- Ip Standard Level: IP67
- Voltage (V): 12.00
- Net Weight (Kg): 0.41
- Pin connector 1: 3.00
- Pin connector 2: 4.00
- External Diameter (mm): 107.25
- Internal Diameter (mm): 37.75
- Net Weight (Kg): 0.73
- Pin connector 1: 3.00
- Voltage (V): 12.00
- Net Weight (Kg): 0.13
- Ampere (A): 150.00
- Pin connector 1: 4.00
- External Diameter (mm): 114.50
- Internal Diameter (mm): 42.00
- Net Weight (Kg): 0.90
- Pin connector 1: 3.00
- Voltage (V): 12.00
- Net Weight (Kg): 0.40
- Pin connector 1: 3.00
- Pin connector 2: 2.00
- Voltage (V): 12.00
- Net Weight (Kg): 0.12
- Ampere (A): 150.00
- Pin connector 1: 4.00
- Voltage (V): 12.00
- Net Weight (Kg): 0.12
- Ampere (A): 150.00
- Pin connector 1: 4.00
United Kingdom 