LC1-PRO Kit: Sensor, Module, Cable
Search for the best combustion
Light and very small in size
Possibility to connect multiple LC1 devices at the same time
Race Use Only Product - Please check details on the "Race use only" footer's section
Description
LC1-PRO is a Lambda kit developed by GET, which monitors the oxygen values in the exhaust gases, an indispensable value for carburation and to achieve the best combustion, and, therefore, maximum power. The kit consists of the Lambda Wide Band sensor connected to the LC1-PRO device for signal conditioning and direct data transfer to the acquisition tools or the engine management unit. In multiple cylinder applications, multiple LC1 devices can be connected at the same time. Lightweight and ultra-small, the LC1-PRO device can be easily mounted without batteries in all batteryless applications, such as off-road competition bikes
- Data Measured: Temperature
- Data Measured: Temperature
- Data Measured: Pressure
- Net Weight (Kg): 0.20
- Data Measured: Pressure
- Net Weight (Kg): 0.22
- Data Measured: Pressure
- Net Weight (Kg): 0.23
- Data Measured: Oxigen values
- batteryCapacity: 6000 mAh
- CCA (A): 360.00
- Max Displacement Supported: 2000 cc
- Start Current: 200 A
- batteryCapacity: 2,5 Ah
- CCA (A): 175.00
- Dimensions (cm): 107x85x56
- Energy (Wh): 32.00
- Replaceable Battery: Si
- display: LCD
- Ip Standard Level: IP67
- Programmable Through App: Yes
- Net Weight (Kg): 0.26
- batteryCapacity: 2 Ah
- CCA (A): 140.00
- Dimensions (cm): 86x90x48
- Energy (Wh): 25.60
- Data Logging Compatibility: Yes
- Compatible With Gpa Switch: No
- Compatible With Get Second Injector: No
- Compatible With Lc Gpa: No
- Net Weight (Kg): 0.30