Standard Bore Cylinder Kit Ø 47,5 mm, 85 cc
Gaskets developed with the most advanced technologies to ensure maximum tightness even at high temperatures and pressures
Maximum durability and smoothness
Same reliability and performance of the original components
Race Use Only Product - Please check details on the "Race use only" footer's section
WARNING: the cylinder head and base gaskets contained in the kit are specifically developed for Athena cylinders kits. Whenever the cylinder kit is disassembled, replace the gaskets with the specific Athena spare gasket kit: DO NOT use OE replacement gaskets.
Descripción
Athena has been constantly investing in cylinder aftermarket replacement parts for more than ten years, to improve their production and performance. All the cylinders are entirely engineered in Italy by Athena’s R&D Department which has a strong internal know-how and cutting-edge tools to design and test each piece. They are coated with motor-nicksil, a nickel-silicon coating developed by Athena to obtain smoothness and optimal wear resistance.
Athena’s cylinder kits and its components are recognized worldwide for their performance, durability and reliability.
Athena’s Standard Bore Cylinder Kit keeps the reliability at the same level of the original components.
The kit includes the high-quality aluminum cylinder, the complete piston with the piston pin and rings, and all the necessary gaskets.
All the components of the kit have been developed to withstand the highest temperatures, pressures and stresses and have been validated by Athena technicians with severe bench and road tests.
This cylinder kit can be installed without making any changes to the engine crankcase.
CAUTION! All Athena products must be used in compliance with the specific national regulations of the member state where it is being marketed or sold. Athena declines all responsibility for any improper use.
Características técnicas
Desplazamiento (cc) | 85.00 |
Diámetro de la perforación (mm) | 47.50 |
Peso Neto (Kg) | 1.43 |
Relación de compresión | 14.9:1 |
Compatible con vehículos
YAMAHA YZ 85 cc 2002/2018 |
Descargas
Descargas
Descargar |
- Diámetro de la perforación (mm): 47.46
- Altura de compresión (mm): 26.00
- Desplazamiento (cc): 83.00
- Diámetro del pasador del extremo grande (mm): 14X9.5X40
- Diámetro de la perforación (mm): 47.45
- Altura de compresión (mm): 26.00
- Desplazamiento (cc): 83.00
- Diámetro del pasador del extremo grande (mm): 14X9.5X40
- Diámetro de la perforación (mm): 47.47
- Altura de compresión (mm): 26.00
- Desplazamiento (cc): 83.00
- Diámetro del pasador del extremo grande (mm): 14X9.5X40
- Diámetro de la perforación (mm): 97.00
- Desplazamiento (cc): 449.00
- Relación de compresión: 13.5:1
- Diámetro de la perforación (mm): 56.00
- Desplazamiento (cc): 249.00
- Relación de compresión: 12.0:1
- Diámetro de la perforación (mm): 54.00
- Desplazamiento (cc): 125.00
- Relación de compresión: 14.7:1
- Peso Neto (Kg): 1.94
- Diámetro de la perforación (mm): 83.00
- Desplazamiento (cc): 282.00
- Ganancia del agujero (mm): + 5
- Relación de compresión: 14.4:1
- Diámetro de la perforación (mm): 78.00
- Desplazamiento (cc): 249.00
- Relación de compresión: 14.1:1
- Diámetro de la perforación (mm): 77.00
- Desplazamiento (cc): 250.00
- Relación de compresión: 13.9:1
- Line: Enduro
- Diámetro de la perforación (mm): 82.00
- Desplazamiento (cc): 276.00
- Ganancia del agujero (mm): + 4
- Relación de compresión: 13.8:1
- Diámetro de la perforación (mm): 49.50
- Desplazamiento (cc): 80.00
- Peso Neto (Kg): 1.43
- Peso Neto (Kg): 0.05
- Peso Neto (Kg): 0.05
- Peso Neto (Kg): 0.02
- Peso Neto (Kg): 0.03