Standard Bore Cylinder Kit Ø 97 mm, 450 cc with Gaskets (no piston included)
Same reliability and performance of the original components
Maximum durability and smoothness guaranteed by a special nickel and silicon treatment
Gaskets developed with the most advanced technologies to ensure maximum tightness even at high temperatures and pressures
Race Use Only Product - Please check details on the "Race use only" footer's section
WARNING: the cylinder head and base gaskets contained in the kit are specifically developed for Athena cylinders kits. Whenever the cylinder kit is disassembled, replace the gaskets with the specific Athena spare gasket kit: DO NOT use OE replacement gaskets.
Descripción
Athena has been constantly investing in cylinder aftermarket replacement parts for more than ten years, to improve their production and performance.
All the cylinders are entirely engineered in Italy by Athena’s R&D Department which has a strong internal know-how and cutting-edge tools to design and test each piece. They are coated with motor-nicksil, a nickel-silicon coating developed by Athena to obtain smoothness and optimal wear resistance.
Athena’s cylinder kits and its components are recognized worldwide for their performance, durability and reliability.
The Standard Bore cylinder kit developed by Athena guarantees the same performance as the original spare parts, extreme reliability and optimal smoothness.
The Easy Cylinder kit includes the high-quality aluminum cylinder with standard bore and top end gasket kit.
All the components of the kit have been developed to withstand the highest temperatures, pressures and stresses and have been validated by Athena technicians with severe bench and road tests.
This cylinder kit can be installed without making any changes to the engine crankcase.
CAUTION! All Athena products must be used in compliance with the specific national regulations of the member state where it is being marketed or sold. Athena declines all responsibility for any improper use.
Características técnicas
Desplazamiento (cc) | 449.00 |
Diámetro de la perforación (mm) | 97.00 |
Peso Neto (Kg) | 1.52 |
Compatible con vehículos
YAMAHA YZ F 450 cc 2020/2022 |
Descargas
Descargas
Mounting Instructions Yamaha YZ 450 F 2020-2022 cylinder kit | Descargar |
- Diámetro de la perforación (mm): 77.00
- Desplazamiento (cc): 250.00
- Relación de compresión: 13.9:1
- Line: Enduro
- Diámetro de la perforación (mm): 78.00
- Desplazamiento (cc): 249.00
- Relación de compresión: 14.1:1
- Peso Neto (Kg): 1.08
- Peso Neto (Kg): 1.56
- Diámetro de la perforación (mm): 97.00
- Desplazamiento (cc): 450.00
- Peso Neto (Kg): 1.52
- Diámetro de la perforación (mm): 96.00
- Desplazamiento (cc): 450.00
- Line: Enduro
- Desplazamiento (cc): 450.00
- Peso Neto (Kg): 1.20
- Line: Enduro
- Desplazamiento (cc): 450.00
- Peso Neto (Kg): 1.30
- Peso Neto (Kg): 1.20
- Line: Enduro
- Detalle del color: Black
- Función de bloqueo y desbloqueo: No
- Modelo: Contour
- Almohadilla incluida: Si
- Ángulo (grados): 45
- Diámetro exterior (mm): 20.00
- Diámetro interior (mm): 24.00
- Peso Neto (Kg): 0.05
- Peso Neto (Kg): 0.05
- Peso Neto (Kg): 0.40
- Ángulo (grados): 45
- Diámetro exterior (mm): 26.00
- Diámetro interior (mm): 20.00
- Peso Neto (Kg): 0.05
- Peso Neto (Kg): 0.40
- Peso Neto (Kg): 0.40
- Peso Neto (Kg): 0.16