2T Cast Piston Ø 39,96 mm for Athena Standard Bore Cylinder Kit
High resistance to mechanical and thermal stresses
Maximized and reliable performances
Excellent price-quality ratio
Description
Athena, leader in producing motorcycle spare parts for over 40 years, unveils its new range of 4-stroke off-road cast pistons. Produced with cutting-edge CNC machining tools, which ensure dimensional tolerances of less than 0.01 mm, Athena pistons are made of a special high-performance aluminum alloy with high silicon content that guarantee the same reliability of the OE piston, while at the same time providing greater resistance and excellent performance. The perfectly smooth profile ensures a regular flow and the perfect flame propagation.
Some pistons’ skirts are moreover treated with a molybdenum disulfide coating applied by screen printing which further reduce friction to enhance performance and durability.
Athena engineers ensure advanced technical solutions and the highest quality standards equal to or better than those adopted in OE production, so as to guarantee performance and reliability.
Each piston, engineered in Italy by Athena R&D department, is tested on engine dynamometer benches under progressive stress load, and thereafter on track to validate its performance even in the most extreme conditions.
The proven quality of Athena pistons is offered at an extremely affordable price.
This piston for Athena Standard Bore cylinder is equipped with piston rings that guarantee less friction with the cylinder and therefore a higher performance.
Athena takes care of the development of the pistons down to the smallest detail: the rings are produced in Japan with wear-resistant coatings (PVD or chromium nitride) to increase the retain and the durability. The rings perfectly adapt to the cylinder liner even at low tangential load.
This piston kit contains the piston, the pin, the circlips, and the piston rings. All components are replaceable and interchangeable in case of need.
All Athena products produced in greater displacement and power than those provided by the road code of the user's country, are intended exclusively for competitive use. Athena declines all responsibility for any use of the product contrary to national regulations.
Guarantee of compliance should not be applicable to products destined for competitive sports use or which are used in high-performance or high-speed applications unless it is a clear case of faultiness.
Technical features
| Big End Pin Diameter (mm) | 10x6x33 |
| Bore Diameter (mm) | 39.96 |
| Net Weight (Kg) | 0.07 |
| Number Of Segments | 1 |
| Piston Head Type | Domed |
| Piston Pin Type | Standard |
| Piston Type | Cast |
Vehicle compatibility
| APRILIA GULLIVER 50 cc |
| APRILIA RALLY 50 cc 1995/2003 |
| APRILIA SCARABEO 50 cc 1993/2005 |
| APRILIA SONIC 50 cc 1998/2007 |
| APRILIA SR REPLICA ARIA 50 cc 1994/2001 |
| APRILIA SR WWW 50 cc |
| ATALA CAROSELLO 50 cc |
| BENELLI 491 GT AIR COOLED 50 cc 1998/1999 |
| BENELLI 491 NAKED 50 cc 2002 |
| BENELLI 491 ST 50 cc 1999/2001 |
| BENELLI K2 50 cc 1998/2001 |
| BENELLI PEPE 50 cc 1999/2001 |
| BETA ARK 50 cc 1996/2008 |
| BETA QUADRA CHRONO 2 50 cc 1995/1999 |
| BETA TEMPO 50 cc 1994/1999 |
| BRANDY JAGUAR 50 cc |
| BRANDY JT 50 cc |
| BS'V DIO JX 50 cc |
| BS VILLA AX 50 cc |
| BS VILLA DIO GZ 50 cc |
| CPI HUSSAR 50 cc |
| CPI POPCORN 50 cc |
| KL CLUB 50 cc |
| KL RACER 50 cc |
| KTM GO 50 cc |
| KTM K 50 cc |
| MACAL CY STING 50 cc |
| MACAL THUNDER 50 cc |
| MALAGUTI CENTRO BASE 50 cc 1993/1994 |
| MALAGUTI CENTRO SL 50 cc 1994/1998 |
| MALAGUTI CENTRO SL KAT 50 cc 1999/2000 |
| MALAGUTI CIAK 50 cc 1999/2000 |
| MALAGUTI CIAK MASTER 50 cc 2004 |
| MALAGUTI CIAK MASTER EU2 50 cc 2006/2018 |
| MALAGUTI CIAK MONO EURO 2 2.3 50 cc 2003/2018 |
| MALAGUTI CIAK MONO EURO 2 50 cc 2003/2018 |
| MALAGUTI CIAK TD 50 cc 2000/2001 |
| MALAGUTI F10 JET LINE / KAT 50 cc 1992/2000 |
| MALAGUTI F10 RESTYLING EU1 50 cc 2001/2002 |
| MALAGUTI F10 RESTYLING / EURO2-2.3 50 cc 2003/2004 |
| MALAGUTI F10 RESTYLING EURO2 50 cc 2002/2006 |
| MALAGUTI F12 PHANTOM 50 cc 1994/1998 |
| MALAGUTI F12 PHANTOM EURO1 50 cc 1999/2000 |
| MALAGUTI F12 PHANTOM KAT 50 cc 1999/2000 |
| MALAGUTI F12 PHANTOM RESTYLING EU1 50 cc 2001/2002 |
| MALAGUTI F12 PHANTOM RESTYLING EU2-2.3 50 cc 2003/2004 |
| MALAGUTI F12 PHANTOM RESTYLING EU2 50 cc 2002 |
| MALAGUTI F12 RESTYLING EU2 50 cc 2006 |
| MALAGUTI F15 FIREFOX AC 50 cc 2005/2006 |
| MALAGUTI YESTERDAY-YESTERDAY EURO 50 cc 1997/2000 |
| MBK CS MACH G 50 cc 2002/2004 |
| MBK HOT CHAMP 50 cc |
| MBK YA EQUALIS 50 cc |
| MBK YA R FORTE 50 cc 1994/1995 |
| MBK YA TA NEW SORRISO 50 cc 1995/1996 |
| MBK YE EVOLIS 50 cc 1992/1995 |
| MBK YH FLIPPER 50 cc 1998/2002 |
| MBK YH FLIPPER CAT 50 cc 1990/2000 |
| MBK YH FLIPPER EURO2 50 cc 2003/2004 |
| MBK YM FIZZ 50 cc 1994/1995 |
| MBK YN R OVETTO 50 cc 1997/2001 |
| MBK YN R OVETTO EURO1 50 cc 2002/2004 |
| MBK YN R OVETTO EURO2 50 cc 2002/2003 |
| MOTRON STING 50 cc |
| MOTRON SYNCRO 50 cc |
| MOTRON THUNDER 50 cc |
| PGO BIG MAX / SPORT 50 cc |
| PGO SUPER FIFTY 50 cc |
| RIEJU WINDY 50 cc |
| SUNDOWN SUPER FIFTY 50 cc |
| YAMAHA CS JOG R 50 cc 2002/2006 |
| YAMAHA CS JOG R EURO2 50 cc 2002/2005 |
| YAMAHA JOG 50 cc |
| YAMAHA JOG ER 50 cc |
| YAMAHA VINO 50 cc |
| YAMAHA YA R AXIS 50 cc 1995/1996 |
| YAMAHA YA ZA JOG Z 50 cc 1995/1996 |
| YAMAHA YE ZEST 50 cc |
| YAMAHA YH WHY 50 cc 1998/2006 |
| YAMAHA YH WHY EURO1 50 cc 1999/2000 |
| YAMAHA YH WHY EURO2 50 cc 2003/2005 |
| YAMAHA YM BREEZE 50 cc 1994/1995 |
| YAMAHA YN NEO'S 50 cc 2004/2016 |
| YAMAHA YN NEO'S EURO2 50 cc 2002/2003 |
| YAMAHA YN R NEO'S / OVETTO 50 cc 1997/2018 |
| YAMAHA YW50 ZUMA 50 cc |
Downloads
Downloads
| Download |
- Bore Diameter (mm): 39.96
- Big End Pin Diameter (mm): 12X8X30,5
- Number Of Segments: 1
- Piston Type: Cast
- Bore Diameter (mm): 39.96
- Compression Height (mm): 25.80
- Big End Pin Diameter (mm): 12x8x33
- Skirt: Forged side relief
- Bore Diameter (mm): 39.96
- Big End Pin Diameter (mm): 12x8x31
- Number Of Segments: 1
- Piston Type: Cast
- Bore Diameter (mm): 39.98
- Big End Pin Diameter (mm): 12X8X30,5
- Number Of Segments: 1
- Piston Type: Cast
- Bore Diameter (mm): 39.97
- Big End Pin Diameter (mm): 12X8X30,5
- Number Of Segments: 1
- Piston Type: Cast
- Bore Diameter (mm): 38.96
- Compression Height (mm): 26.00
- Big End Pin Diameter (mm): 12X31.5X8
- Skirt: Forged side relief
- Bore Diameter (mm): 39.98
- Compression Height (mm): 25.80
- Big End Pin Diameter (mm): 12x8x33
- Skirt: Forged side relief
- Bore Diameter (mm): 39.96
- Compression Height (mm): 25.80
- Big End Pin Diameter (mm): 12x8x33
- Skirt: Forged side relief
- Net Weight (Kg): 0.06
- Oil Seal Height (mm): 11.00
- Oil Seal External Diameter (mm): 54.00
- Oil Seal Internal Diameter (mm): 41.00
- Net Weight (Kg): 0.40
- Net Weight (Kg): 0.06
- Oil Seal Height (mm): 10.50
- Oil Seal External Diameter (mm): 53.00
- Oil Seal Internal Diameter (mm): 41.00
- Net Weight (Kg): 0.05
- Oil Seal Height (mm): 10.50
- Oil Seal External Diameter (mm): 52.00
- Oil Seal Internal Diameter (mm): 40.00
- Net Weight (Kg): 0.05
- Oil Seal Height (mm): 11.00
- Oil Seal External Diameter (mm): 54.00
- Oil Seal Internal Diameter (mm): 43.00
- Net Weight (Kg): 0.05
- Oil Seal Height (mm): 11.00
- Oil Seal External Diameter (mm): 48.00
- Oil Seal Internal Diameter (mm): 35.00
- Net Weight (Kg): 0.29
United States