RX1 EVO-E Control Unit with WiFiCOM and Map Switch
The image shown here is for illustrative purposes only and might not fully display the features of the product
Race Use Only Product – Not intended for street use – Please check details on the “Race use only” footer’s section
Description
Our Enduro 4T ECUs for KTM and Husqvarna bikes get an upgrade to the EVO-E configuration. Three new part numbers fitting EXC-F/FE 250/350/450 2017-2019, including WifiCom and map switch. Plug&play on standard engines and completely reprogrammable, it comes with 2 maps developed by GET R&D Department:
• Map 1: Racing
• Map 2: Racing + GPA “Traction Control” Level 5.
RX1 EVO-E works perfectly on standard engines, also with racing exhaust, and is the best solution in case of engine modifications: via our MAYA software it will be possible to re-map the ECU to match any specific needs. The RX1 EVO-E are convertible to one another by simply switching the maps.
Bullet points
2 preinstalled and reprogrammable maps
10 different levels of traction control thanks to the GPA technology
Compatible wtith electronic launch control
Technical features
| Compatible Also With Tuned Engines | Yes |
| Compatible With Get Second Injector | No |
| Compatible With Gpa Switch | Yes |
| Compatible With Lc Gpa | Yes |
| Compatible With SX1 Connect | Not set |
| Compatible With SX1 Controller | Not set |
| Compatible With Wificom | Yes |
| Data Logging Compatibility | Yes |
| Gpa Switch Included | No |
| Kit Second Injector Included | No |
| LC GPA Included | No |
| Map Setting Modality | Via WiFiCOM Via MAYA |
| SX1 Connect Included | Not set |
| SX1 Controller Included | Not set |
| Wificom Included | No |
- Replaceable Battery: No
- display: LCD
- Battery Life: 6 years
- Ip Standard Level: IP67
- Voltage (V): 12.00
- Net Weight (Kg): 0.41
- Pin connector 1: 3.00
- Pin connector 2: 4.00
- External Diameter (mm): 107.25
- Internal Diameter (mm): 37.75
- Net Weight (Kg): 0.73
- Pin connector 1: 3.00
- Voltage (V): 12.00
- Net Weight (Kg): 0.13
- Ampere (A): 150.00
- Pin connector 1: 4.00
- External Diameter (mm): 114.50
- Internal Diameter (mm): 42.00
- Net Weight (Kg): 0.90
- Pin connector 1: 3.00
- Voltage (V): 12.00
- Net Weight (Kg): 0.40
- Pin connector 1: 3.00
- Pin connector 2: 2.00
- Voltage (V): 12.00
- Net Weight (Kg): 0.12
- Ampere (A): 150.00
- Pin connector 1: 4.00
- Voltage (V): 12.00
- Net Weight (Kg): 0.12
- Ampere (A): 150.00
- Pin connector 1: 4.00
