SX1 PRO 4T Control Unit with SX1 Controller, SX1 Connect and Second Injector Kit
Race Use Only Product – Not intended for street use – Please check details on the “Race use only” footer’s section
Description
SX1 PRO FACTORY KIT is the racing kit composed by SX1 PRO ECU and 2nd injector, developed by GET R&D Department to optimize the flow of fuel at mid and top, guaranteeing better performance. The kit is designed for 250cc 4-stroke engines starting from 2024 onwards and takes the most out of the engine without compromising the reliability.
SX1 PRO in the kit is ready with two maps:
- Map 1: for a standard engine with OEM single injector
- Map 2: for a standard engine with GET second injector.
These maps are totally reprogrammable through both WiGET App, by using the included SX1 CONNECT device, and/ or MAYA software (sold separately).
Bullet points
Maximum power and reliability
Easy and intuitive to mount
Integrated Traction Control (GPA technology) and compatible with electronic Launch Control (SX1 LC-GPA device)
Downloads
| SX1 PRO 4T Instruction Manual | Download | |
| SX1 CONTROLLER Instruction Manual | Download | |
| SX1 CONNECT Instruction Manual | Download | |
| 2nd Inj Kit Manual SX1 PRO KTM SXF 250 2025-26 | GASGAS MCF 250 2025-26 | HUSQVARNA FC 250 2025-26 | Download | |
| Application maps 2nd inj kit SX1 PRO (KTM/HUSQ./GASGAS SXF/FC/MCF250 2026)_SX26 | zip | Download |
- batteryCapacity: 2,5 Ah
- CCA (A): 175.00
- Dimensions (cm): 107x85x56
- Energy (Wh): 32.00
- Replaceable Battery: Si
- display: LCD
- Ip Standard Level: IP67
- Programmable Through App: Yes
- Suitable For: SX1 SERIES
- Suitable For: ALL G.E.T. ECUs
- Net Weight (Kg): 0.50
- Suitable For: SX1 SERIES
- Net Weight (Kg): 0.50
- Product Typology: Programming kit
- Suitable For: SX1 SERIES
- Dimensions (cm): 100
- Replaceable Battery: No
- display: LCD
- Battery Life: 6 years
- Ip Standard Level: IP67
- Voltage (V): 12.00
- Net Weight (Kg): 0.41
- Pin connector 1: 3.00
- Pin connector 2: 4.00
- External Diameter (mm): 107.25
- Internal Diameter (mm): 37.75
- Net Weight (Kg): 0.73
- Pin connector 1: 3.00
- Voltage (V): 12.00
- Net Weight (Kg): 0.13
- Ampere (A): 150.00
- Pin connector 1: 4.00
- External Diameter (mm): 114.50
- Internal Diameter (mm): 42.00
- Net Weight (Kg): 0.90
- Pin connector 1: 3.00
- Voltage (V): 12.00
- Net Weight (Kg): 0.40
- Pin connector 1: 3.00
- Pin connector 2: 2.00
- Voltage (V): 12.00
- Net Weight (Kg): 0.12
- Ampere (A): 150.00
- Pin connector 1: 4.00
- Voltage (V): 12.00
- Net Weight (Kg): 0.12
- Ampere (A): 150.00
- Pin connector 1: 4.00
Australia 